CA-10
Vibration calibration device
CA-10 Specification:
| Calibration range (typical) | |
| ”Normal” accelerometers: | 0 to 19.99pC/m/s2 |
| Accelerators with built-in ”pre-amp..” | 0 to 19.99 mV/m/s2 |
| Calibratable sensor weight | Approx. 130 gm or less |
| Calibration accuracy | (3% +2digit) (23 5) |
| Exciter vibration acceleration | 4.9 m/S2 3% (23 5) |
| Exciter vibration frequency | 159.2 Hz 2% |
| Sensor attachment | M6 female, depth of 6.5 mm |
| Usable/Storage temperature range | ±0 to +50 °C |
| Batteries | 4 AA batteries |
| Power consumption | 120mA MAX. |
| Battery life in continuous use: | |
| approx. 8 hours, for approx. 1,500 calibrations | |
| (sensor weight: 40gm, single calibration time: approx. 30 sec.) | |
| Power supply for accelerometer: | |
| DC 24 V 2 mA Constant current supply | |
| Current values may differ from those specified | |
| Dimensions | 120 (W) x 140(D) x 50(H) mm |
| Weight | Approx. 1 kg (Including batteries) |
| Accessories Included: | |
| Cable LN-023 0.5m Miniature-BNC 1 | |
| Conversion studs: | |
| M6-M4, M6-10-32, M6-flat, M6 standard stud (one each) | |