AQ-VU datalogger (visual data recorder) - Specification

 

   
Changing video channels Changing video channels per one field (1/60 second)
Video viewing 4 channels piecewise viewing or full screen viewing( selected channels)
Waveform / Bar meter Selectable waveform or bar meter (overlay)
Start recording Push REC button to REC standby, push FWD button to start recording. Or external signal (START/STOP)
Stop recording Push STOP button to STOP. Or External signal (START/STOP)
Recording mode Over write: Endless recording over writing to old data. HDD full: Stop recording on HDD full
Reproducing Normal, Reverse, Still, Frame advance, Block, Forward, Rewind
Searching Time search: Searching specifying Date and Time.
Event search: Searching specifying event.
Block search: Specifying start and stop point.
Event list May. 1,000 even t can be set during the recording.

Channels Pixel Field per sec.
1 720 x 240 60
2 720 x 240 30
3 720 x 240 30 / 15
4 720 x 240 15
4 360 x 120 60

 
Video input 4ch, BNC NTSC VBS 1.0 Vp-p 75 ohm
Video output 1ch, BNC NTSC VBS 1.0Vp-p +/-1.0% 75 ohm
Analog input 4ch, Sampling frequency: 2 kHz fixed
Analog output 4ch.
A/D bits 16bits (LSB is used for ID code)
A/D converter Successive Approximation / Multiplex
Compression format Motion JPEG (Original)
Media 2.5 inch removable HDD pack 40 GB
Environment Temperature: 0 deg to 35 deg C 10 to 80%RH
Power consumption 12V 2A (Without power supply to camera)
Power source DC10V to DC17V
AC100V to 240V 50/60Hz (AC adapter)
Dimension Approx. 200W x 205D x 60H mm
Weight Approx. 2.3kg (Including 40GB HDD pack)

ROGA-Instruments is the authorized distributor of TEAC Europe GmbH and TEAC Instruments (Japan) for all TEAC measurement products. We also provide any support and service for these products.
ROGA-Instruments takes over no liability for the correctness and/or completeness of the pictures and descriptions. We are left to ourselves the right any time and without to carry out special announcement changes in and/or the description.